Pull Cylinder

Single acting (spring return), pull type, front flange mounting


 

Description :

Pull cylinders are single acting, spring return cylinders, suitable for use with a hydropneumatic Intensifier.

Installation :

A square flange with 4 mounting holes is provided on the front side for mounting purpose. The cylinder can be mounted on the front flange as shown in fig. 1. The cylinder can be mounted on the back side with long screws as shown in fig. 2.

Specifications :

  • Maximum operating pressure - 200 bar.
  • Return spring back pressure - @ 1 bar.

Notes :

  • Heavy extensions to the piston rod can influence the return stroke of the cylinder.
  • As the cylinder is single acting, spring return, a breather is provided. It should be protected from the cutting liquid and coolant.
  • For ordering the seal kit, add the prefix "S" to the part number.
  • For Non-standard cylinder requirements, Please contact sales@hypowerclamps.com.


Dimensional details :

 
FORCE* 11 kN 22 kN 30 kN
øBORE 38 50 60
STROKE±1 15 15 15
A 45 55 68
B 60 67 85
C 7 9 11.0
D 52 62 78
D1 38 45 65
d 22 25 32
E M12 M16 M20
G 1/4" 1/4" 3/8"
L 50 50 58
SW 17 20 28
PART NO. 1910100 1920100 1930100
MINIMUM SPRING FORCE 415 N 501 N 507 N
OIL VOLUME 12 cc 22 cc 30 cc
WEIGHT 1.5 kg 2.5 kg 3.5 kg
* Force is specified at 150 bar.
All dimensions are in mm, Overall dimension tolerance ± 0.5 mm.
Subject to change for improvement. (Revision - July12)

Application Example :