Manifold Mounting Cylinder

Single acting (spring return), push type


 

Description :

These clamping cylinders are single acting spring return cylinders. These cylinders are fitted either in tapped hole in fixture, or in manifold. Sealing ‘O’ Ring is provided on the face of the cylinder.

Advantages :

These cylinders are suitable to clamp smaller work pieces and when two or more jobs are clamped with short distance in between. The advantage of these cylinders is piping gets eliminated.

Installation :

Sealing ring is provided on the face of cylinder, for proper sealing resting face should be flat & square to thread axis.

Specifications :

  • Maximum operating pressure - 200 bar.
  • Return spring back pressure - @ 1 bar.

Notes :

  • Manifold mounting cylinders must not be subjected to a load in retracted position.
  • These cylinders must not be loaded in unpressurised mode. Minimum wall thickness 3 mm for manifold.
  • As the cylinder is single acting, spring return, a breather is provided. It should be protected from cutting liquids and coolants.
  • For ordering the seal kit, add the prefix "S" to the part number.
  • For Non-standard cylinder requirements, Please contact sales@hypowerclamps.com.


Dimensional details :

 
FORCE* 0.75 kN 3 kN 7.22 kN
øBore 8 16 25
A M12x1.5 M24x1.5 M36x1.5
B 13 14 21
C 40 45 52
d 5 10 16
E 46 51 58
F NA NA M10
SW1 16 27 41
SW2 NA 8 14
PART NO. 1703500 1703600 1730700
MAXIMUM
SEATING TORQUE
10 Nm 110 Nm 130 Nm
MINIMUM
SPRING FORCE
12.7 N 57.7 N 106.3 N
WEIGHT 55 gm 190 gm 580 gm
OIL VOLUME 0.5 cc 2 cc 5 cc
* Force is specified at 150 bar.
All dimensions are in mm, Overall dimension tolerance ± 0.5 mm.
Subject to change for improvement. (Revision - July12)

Application Example :